1/28 Q&A part 2
- Super Pershing in HD will come “very soon”
HD 超潘「很快」就會推出
- HD IS-3 will keep the unhistorical BL-9 gun
不會拔掉 HD IS-3 上面不合史實的 BL-9 主砲
- current interation of HD IS-3 has 50913 polygons
目前的 HD IS-3 模型有 50913 個多邊形
- in HD, various “paper” vehicles’ details will be modelled using analogy
to existing vehicles (for example, T110 like M103 and others)
當 HD 化時，圖紙車的細節會用相似的史實車來類推（例如 E110 會用 M103 類推）
- HD models are now produced by both outsourcers and by WG internally
HD 模組目前是由外包商和 WG 共同製作
- Tiger II and T-62A in HD will also come relatively soon
虎王和 T-62A 將在近期 HD 化
- for now, the base color of German models will not be changed (SS: player
specifically asked from Feldgrau to Dunkelgrau)
目前不打算更換德國車的底色
- Storm states that when it comes to the frontal plate angles of HD IS-3,
everything should be alright
Storm 表示 HD IS-3 的車頭裝甲角度不會有問題
- M6A2E1 HD model is not ready yet
HD 大頭 M6 還沒好
- there will not be any new artillery branches in 2015
今年不會有新的自走砲線
http://ftr.wot-news.com/2015/01/28/28-1-2015-part-ii/
= = = = 以上補完 = = = =
- Storm confirms: artillery will have exactly the same shell distribution as
other the vehicles, the 9.6 nerf concerns arty too
Storm 證實，9.6 準度下修有考慮到自走砲，他們也會一體適用
- Storm is not aware of a plan to remove IS-6 from the shops
Storm 不知道 IS-6 有任何下架計畫
- in 9.6, HD Ferdinand has an incorrect track movement (it behaves like if
the drive sprocket was in the front and not in the rear), it will be fixed
HD 肥男的履帶動作有誤（看起來動力輪在前），會修正
- there is a “legend” going on around RU forums about the IS-3 frontal
armor breaking up in welds after being shot at. Storm states that this
happened only once during the testing, after which the design of the frontal
nose part was reworked for this never to happen again.
IS-3 簇型車頭被射擊時會裂開的傳說；Storm 表示那只在測試時發生過一次，變更設計
後就再也沒發生過了
- it was proposed internally within WG to add Oddball’s Sherman from the
movie Kelly’s Heroes.
WG 內部有將 Kelly’s Heroes 這部電影裡 Oddball 的雪曼加進 WoT 的建議
- the HD E-100 gun is of correct thickness and length
HD E-100 主砲長度和厚度都正確
- some details on the HD E-100 model will be reworked to higher details
HD E-100 會再細緻化
- the 150mm upper front plate strip of HD E-100 model will remain 150mm
thick, its angle however will be fixed
HD E-100 的首上上半部會保持 150mm 的厚度，但是角度會修正
詳見：http://i.imgur.com/Q7eCbuF.gif
- Storm confirms that gradually, fake or problematic (not very historical)
vehicles will be removed from the game, this includes current overbuffed
FV4202, FV215b (120) and WT E-100
Storm 證實，虛構或真實性有問題的車將逐漸被移除，名單包含 FV4202、FV215b (120)
和 WT E-100
（譯者：之前提過 T28 也會換）
- another reason for WT E-100 replacement is the fact that it’s really hard
to balance, either it sucks or it gets overpowered
WT E-100 被移除的另一個原因是太難平衡：不是太強就是太爛
- HD IS-3 collision model is not developed yet, Storm will see if there are
any armor nerfs or buffs
HD IS-3 的裝甲模組還沒做，Storm 會關心是否有更動
- currently, WG developers are collecting photos of Batchat 25t rusty
prototype so they have more materials for its HD rework
目前 WG 正在蒐集 Batchat 25t 那台生鏽原型車的照片，看看能不能收集多一些訊息
幫助 HD 化
- no ETA on IS-3 in HD “for various reasons”
HD IS-3 沒有時間表，「很多原因啦」
- some models are created using the photogrammetry method, while others are
3D scanned. Photogrammetry is an alternative method, because the 3D scanner
can’t be used everywhere (SS: the background of this question is that I
asked Storm, why is WG waiting for a 3D scan of Action X turret from
Bovington, when they are using a different method here).
有些模型是用攝影測量法建模，而有些是用 3D 掃描。攝影測量法是無法使用 3D 掃描
時的備案。
HD IS-3 的最新圖片：
http://ftr.wot-news.com/wp-content/uploads/2015/01/T4DnMkm.jpg
http://ftr.wot-news.com/2015/01/27/27-1-2015/
http://ftr.wot-news.com/2015/01/28/28-1-2015/