https://mobile.twitter.com/NianticHelp/status/1624196516691812355
https://i.imgur.com/9pQyTZL.jpg
以前掃寶芬都是原地晃手機
現在官方說曾經這樣幹的玩家不能再接寶芬任務了
我就是，我被ban，先幫自己QQ
官網的補給站掃描技巧
重點大概是第2段跟第5段
不要站在原地晃手機
掃描距離是10公尺內(35英尺)
https://niantic.helpshift.com/hc/en/6-pokemon-go/faq/3834-pokestop-scanning-techniques/
Last Updated: 17h
There are a few best practices to follow in order to guarantee a high quality
scan:
Check the area to be scanned and the surroundings of the PokéStop to
determine if there are any obstacles and to select a scanning route. It is
necessary to plan the route you intend to use for scanning before starting
the procedure.
Make sure your camera is in focus. Keep your phone as close to your side as
possible to avoid blurring. Walk around the PokéStop you are scanning
instead of standing in one location and moving your phone.
Walk at a slow and natural stroll pace. Move slowly and smoothly during
scanning. Sudden changes of direction are a definite no-no. Move slowly and
smoothly with your feet on the ground. If you are scanning in a darker
setting, it’s even more important to move slowly and smoothly. Move the
phone with you while you are moving (think crab walk).
The PokéStop should always be the focal point. It is important to focus on
the PokéStop and capture the full 360° orbit of it. If it is not safe or
not possible to get 360° coverage, capture as much as you can.
Vary your distance/angles (0-10m or 0-35ft). It is important that we capture
the environment around the PokéStop and have a variety of different scans. It
’s important to vary your distance and angles while scanning the PokéStop.
While recording, prompts may appear on screen if issues with the quality of
your scan are detected (i.e. light is insufficient, movement is too slow).