之前有好心的人跟我說可以看
evdev 的 DragLockButtons ， /etc/X11/xorg.conf.d/
或是libinput
我看了這份文件
https://tinyurl.com/qooofev
還是不懂DragLockButtons的說明
它寫說如果只設一個值，代表"meta" locking button
設一對值,代表第一個值為lock button第二個值為logical button number
我想要設定滑鼠左鍵為DragLockButtons
我的設定文件似乎都是在/usr/share/X11/xorg.conf.d下
在/etc/X11下並沒有xorg.conf.d資料夾
但是我找不到"Log"Logitech USB Optical Mouse"的設定檔在哪
在目錄下用grep找也找不到
另外我從xinput list-props 9中沒看到ButtonMapping
所以參照下面這份文件試著用xinput set-prop來設定
也完全沒作用
https://wiki.archlinux.org/index.php/Logitech_Marble_Mouse
請問該怎麼設才對?
謝謝
以下是我的Ubuntu xinput list畫面
[email protected]:~# xinput list
Virtual core pointer id=2 [master pointer (3)]
Virtual core XTEST pointer id=4 [slave
pointer (2)]
Logitech USB Optical Mouse id=9 [slave
pointer (2)]
ATEN UC-10KM V1.3.124 id=12 [slave
pointer (2)]
Virtual core keyboard id=3 [master keyboard (2)]
Virtual core XTEST keyboard id=5 [slave
keyboard (3)]
Power Button id=6 [slave
keyboard (3)]
Video Bus id=7 [slave
keyboard (3)]
Power Button id=8 [slave
keyboard (3)]
ATEN UC-10KM V1.3.124 id=10 [slave
keyboard (3)]
Chicony USB Keyboard id=11 [slave
keyboard (3)]
Chicony USB Keyboard id=13 [slave
keyboard (3)]
[email protected]:~# xinput list-props 9
Device 'Logitech USB Optical Mouse':
Device Enabled (133): 1
Coordinate Transformation Matrix (135): 1.000000, 0.000000, 0.000000,
0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
Device Accel Profile (260): 0
Device Accel Constant Deceleration (261): 1.000000
Device Accel Adaptive Deceleration (262): 1.000000
Device Accel Velocity Scaling (263): 10.000000
Device Product ID (250): 1133, 49271
Device Node (251): "/dev/input/event4"
Evdev Axis Inversion (264): 0, 0
Evdev Axes Swap (266): 0
Axis Labels (267): "Rel X" (143), "Rel Y" (144), "Rel Vert Wheel" (259)
Button Labels (268): "Button Left" (136), "Button Middle" (137),
"Button Right" (138), "Button Wheel Up" (139), "Button Wheel Down" (140),
"Button Horiz Wheel Left" (141), "Button Horiz Wheel Right" (142), "Button
Side" (254), "Button Extra" (255), "Button Forward" (256), "Button Back"
(257), "Button Task" (258), "Button Unknown" (253), "Button Unknown" (253),
"Button Unknown" (253), "Button Unknown" (253)
Evdev Scrolling Distance (269): 1, 1, 1
Evdev Middle Button Emulation (270): 0
Evdev Middle Button Timeout (271): 50
Evdev Third Button Emulation (272): 0
Evdev Third Button Emulation Timeout (273): 1000
Evdev Third Button Emulation Button (274): 3
Evdev Third Button Emulation Threshold (275): 20
Evdev Wheel Emulation (276): 0
Evdev Wheel Emulation Axes (277): 0, 0, 4, 5
Evdev Wheel Emulation Inertia (278): 10
Evdev Wheel Emulation Timeout (279): 200
Evdev Wheel Emulation Button (280): 4
Evdev Drag Lock Buttons (281): 0
我不曉得Drag Lock Buttons要怎麼設定才是正確的?也有試過其他數字
如果設定xinput set-prop 9 281 136
會顯示BadValue(integer parameter out of range for operation)
[email protected]:~# xinput set-prop 9 281 2 2 (無作用)
[email protected]:/usr/share/X11/xorg.conf.d# ls
10-amdgpu.conf 10-quirks.conf 11-evdev-trackpoint.conf
50-vmmouse.conf 51-synaptics-quirks.conf
10-evdev.conf 11-evdev-quirks.conf 50-synaptics.conf 50-wacom.conf
※ 引述《upufuxup (HelloRain)》之銘言：
: Windows 的滑鼠設定裡,可以啟動"點選鎖定",
: 讓使用者在反白或拖曳時,不須一直按著滑鼠,
: 只要按一下滑鼠鍵,放開,再按一次滑鼠鍵即可
: 我想要在Ubuntu裡也啟用這個功能
: 我查了imwheel跟xmodmap的設定教學,可是都找不到怎麼設定"點選鎖定"
: 請問有甚麼方法可以在Ubuntu上設定滑鼠"點選鎖定"?
: 謝謝