Raspberry Pi 3 模擬(實作) Amazon echo
(註)本篇較不適合樹莓派新手
公司說要開發類似echo家電產品 可以聲控 不要再用按鍵才會執行
經過三四天的努力 搞出來柳 避免大家走歪路 浪費寶貴的時間
一開始懵懵懂懂 不知從何下手
公司是有買了一支echo 但是看到還耍用手機(美國google store下載App)登錄才能用
在台灣不行用齁 而且還要綁定信用卡
就有點想打退堂鼓了
還好查網路可以用RPI實作 想想也是 沒魚蝦也好 就試試看囉
先從YouTube入手
看了三四個肥宅的影片 跟真的一樣 隨便一倆下子就搞定了
可偶照著操作 step by step Alexa就是沒反應
自信心大受打擊 如此用掉了兩天
只停留在可以放音樂/錄音階段
歸納幾個問題點
1. RPI 版本 2 or 3
2. 硬體音效設定
3. Amazon Developer Account 設定
(為避免愈描愈黑 就不再詳述錯誤或模稜兩可情形)
找不到錯誤原因 也找不到正解
只好再想別的方法
其中Amazon 有提供一個網頁版的模擬Echo給人測試
結果喊破了喉嚨 也沒人理
通常這個時候 依照慣例 都是往大陸求教 他棉人多資源也多 好辦事
可是好死不死 這個案子必須要同時上Amazon網站 取得權仗 才能用
加上也許太愛國了 他們也有自取的語音辨識cloud
結果就是只有少數一些舊資料 沒啥路用
Alexa不行 換Jasper好了
網路找到一些文章 "即時口譯機器人DIY" "宇宙翻譯機"...
按圖施工 也是搞了兩天 無動於衷
自信心即將直達谷底
過了一個風雨的週末
從頭來過 才找這篇正解
https://www.raspberrypi.org/blog/amazon-echo-homebrew-version/
Want to build your own? Here’s a video guide to setting the beast up from
Novaspirit
Tech. You can also find everything you need on Amazon’s GitHub.
________________________________________
https://github.com/alexa/alexa-avs-sample-app
About the project
This project provides a step-by-step walkthrough to help you build a
hands-free Alexa
Voice Service (AVS) prototype in 60 minutes, using wake word engines from
Sensory or
KITT.AI. Now, in addition to pushing a button to "start listening", you can
now also
just say the wake word "Alexa", much like the Amazon Echo. You can find
step-by-step
instructions to set up the hands-free prototype on Raspberry Pi, or follow
the
instructions to set up the push-to-talk only prototype on Linux, Mac, or
Windows.
________________________________________
https://github.com/alexa/alexa-avs-sample-app/wiki/Raspberry-Pi
On this page
‧ Overview
‧ Required Hardware
‧ Step-by-step Guide
‧ Extra Credit (Setup SSH & VNC)
________________________________________
Overview
This guide provides step-by-step instructions for setting up AVS on a
Raspberry Pi. It
demonstrates how to access and test AVS using our Java sample app (running on
a
Raspberry Pi), a Node.js server, and a third-party wake word engine. You will
use the
Node.js server to obtain a Login with Amazon (LWA) authorization code by
visiting a
website using your Raspberry Pi’s web browser.
For instructions on how to set it up on Mac, Linux or Windows, please see our
wiki.
________________________________________
Required hardware
Before you get started, let’s review what you’ll need.
1. Raspberry Pi 3 (Recommended) or Pi 2 Model B (Supported) - Buy at Amazon -
Pi
3 or Pi 2.
2. Micro-USB power cable for Raspberry Pi.
3. Micro SD Card (Minimum 8 GB) - You need an operating system to get
started.
NOOBS (New Out of the Box Software) is an easy-to-use operating system
install manager
for Raspberry Pi. The simplest way to get NOOBS is to buy an SD card with
NOOBS pre-
installed - Raspberry Pi 8GB Preloaded (NOOBS) Micro SD Card. Alternatively,
you can
download and install it on your SD card (follow instructions here).
4. USB 2.0 Mini Microphone - Raspberry Pi does not have a built-in
microphone; to
interact with Alexa you’ll need an external one to plug in - Buy on Amazon
5. External Speaker with 3.5mm audio cable - Buy on Amazon
6. A USB Keyboard & Mouse, and an external HDMI Monitor - we also recommend
having a USB keyboard and mouse as well as an HDMI monitor handy if you’re
unable to
remote(SSH)into your Pi.
7. Internet connection (Ethernet or WiFi)
8. (Optional) WiFi Wireless Adapter for Pi 2 (Buy on Amazon). Note: Pi 3 has
built-in WiFi.
For extra credit, we’ll show you how to remote(SSH) into your device,
eliminating the
need for a monitor, keyboard and mouse - and how to tail logs for
troubleshooting.
________________________________________
Let’s get started
The original Alexa on a Pi project required manual download of
libraries/dependencies
and updating a series of configuration files that were prone to human error.
To make
the process faster and easier, we’ve included an install script with the
project that
will take care of all the heavy lifting. Not only does this reduce setup time
to less
than an hour on a Raspberry Pi 3, it only requires developers to adjust three
variables in a single install script -
________________________________________
Step 1: Setting up your Pi
Unless you already have Raspbian Stretch or Jessie installed on your Pi,
please follow
our guide - Setting up the Raspberry Pi - that will walk you through
downloading and
installing Raspbian, and connecting the hardware (if you’re unfamiliar with
Raspberry
Pi, we highly recommend you follow the guide above to get your Pi up and
ready before
moving further).
________________________________________
Step 2: Register for an Amazon developer account
Unless you already have one, go ahead and create a free developer account at
developer.amazon.com. You should review the AVS Terms and Agreements here.
________________________________________
Step 3: Create a device and security profile
Follow the steps here to register your product and create a security profile.
Make note of the following parameters. You’ll need these in Step 5 below.
财 ProductID (also known as Device Type ID),
财 ClientID, and
财 ClientSecret
Important: Make sure your Allowed Origins and Allowed Return URLs are set
under
Security Profile > Web Settings (see Create a device and security profile):
‧ Allowed Origins: https://localhost:3000
‧ Allowed Return URLs: https://localhost:3000/authresponse
________________________________________
Step 4: Clone the sample app
Open terminal, and type the following:
cd Desktop
git clone https://github.com/alexa/alexa-avs-sample-app.git
________________________________________
Step 5: Update the install script with your credentials
Before you run the install script, you need to update the script with the
credentials
that you got in step 3 - ProductID, ClientID, ClientSecret. Type the
following in
terminal:
cd ~/Desktop/alexa-avs-sample-app
nano automated_install.sh
Paste the values for ProductID, ClientID, and ClientSecret that you got from
Step 3
above.
The changes should look like this:
财 ProductID=”RaspberryPi3”
财 ClientID=”amzn.xxxxx.xxxxxxxxx”
财 ClientSecret=”4e8cb14xxxxxxxxxxxxxxxxxxxxxxxxxxxxx6b4f9”
Type ctrl-X and then Y, and then press Enter to save the changes to the file.
________________________________________
Step 6: Run the install script
You are now ready to run the install script. This will install all
dependencies,
including the two wake word engines from Sensory and KITT.AI.
Note: The install script will install all project files in the folder that
the script
is run from.
To run the script, open terminal and navigate to the folder where the project
was
cloned. Then run the following command:
cd ~/Desktop/alexa-avs-sample-app
. automated_install.sh
You’ll be prompted to answer a few simple questions. These help to ensure
that
you’ve completed all necessary prerequisites before continuing.
When the wizard starts, go grab a cup of coffee - it takes about 30 minutes.
________________________________________
Step 7: Run your web service, sample app and wake word engine
Now that installation is complete, you’ll need to run three commands in 3
separate
terminal windows:
1. Terminal Window 1: to run the web service for authorization
2. Terminal Window 2: to run the sample app to communicate with AVS
3. Terminal Window 3: to run the wake word engine which allows you to start
an
interaction using the phrase “Alexa”.
Note: These commands must be run in order.
Terminal Window 1
Open a new terminal window and type the following commands to bring up the
web service
which is used to authorize your sample app with AVS:
cd ~/Desktop/alexa-avs-sample-app/samples
cd companionService && npm start
The server is now running on port 3000 and you are ready to start the client.
See API Overview > Authorization to learn more about authorization.
________________________________________
Terminal Window 2
Open a new terminal window and type the following commands to run the sample
app,
which communicates with AVS:
cd ~/Desktop/alexa-avs-sample-app/samples
cd javaclient && mvn exec:exec
See API Overview > Interfaces to learn more about the messages sent to/from
AVS.
Let’s walk through the next few steps relevant to Window 2.
1. When you run the client, a window should pop up with a message that says -
Please register your device by visiting the following URL in a web browser
and
following the instructions:
https://localhost:3000/provision/d340f629bd685deeff28a917.
Would you like to open the URL automatically in your default browser?
Click on “Yes” to open the URL in your default browser.
2. If you’re running Raspbian with Pixel desktop (and with Chromium
browser),
you may get a warning from the browser. You can get around it by clicking on
Advanced
-> Proceed to localhost(unsafe).
3. You’ll be taken to a Login with Amazon web page. Enter your Amazon
credentials.
4. You’ll be taken to a Dev Authorization page, confirming that you’d like
your
device to access the Security Profile created earlier.
Click Okay.
5. You will now be redirected to a URL beginning with
https://localhost:3000/authresponsefollowed by a query string. The body of
the web
page will say device tokens ready.
6. Return to the Java application and click the OK button. The client is now
ready to accept Alexa requests.
________________________________________
Terminal Window 3
Note: Skip this step to run the same app without a wake word engine.
This project supports two third-party wake word engines: Sensory’s
TrulyHandsFree and
KITT.AI’s Snowboy. The -e parameter is used to select the agent and supports
two
values for {{engine}}: kitt_ai and sensory.
Open a new terminal window and use the following commands to bring up a wake
word
engine from Sensory or KITT.AI. The wake word engine will allow you to
initiate
interactions using the phrase “Alexa”.
To use the Sensory wake word engine, type -
cd ~/Desktop/alexa-avs-sample-app/samples
cd wakeWordAgent/src && ./wakeWordAgent -e sensory
or, type this to use KITT.AI’s wake word engine -
cd ~/Desktop/alexa-avs-sample-app/samples
cd wakeWordAgent/src && ./wakeWordAgent -e kitt_ai
Now you have a working hands-free AVS prototype!
Use the following resources to learn more about available wake word engines:
‧ Sensory
‧ KITT.AI
________________________________________
Step 8: Talk to Alexa
You can now talk to Alexa by simply using the wake word “Alexa”. Try the
following -
Say “Alexa”, then wait for the beep. Now say “what’s the time?”
Say “Alexa”, then wait for the beep. Now say “what’s the weather in
Seattle?”
If you prefer, you can also click on the “Listen” button, instead of using
the wake
word. Click once on the “Listen” button, after releasing the click, wait
for the
audio cue before beginning to speak. It may take a second or two before you
hear the
audio cue.
________________________________________
Step 9: How to Log Out of the Sample App
See Sample App Log Out Instructions.
Sample App Log Out Instructions
Known Issue
To log out of the AVS java sample app you must clear your sessionId in
/samples/javaclient/config.json, and delete your refresh_tokens file in the
/samples/companionService folder. Otherwise, the sample app will authenticate
on each
reboot.
Solution
Follow these instructions to log out of the AVS java sample app:
1. Quit the AVS java sample app (CTRL + C).
2. Open /samples/javaclient/config.json and clear your sessionId. It should
look
like this:
3. "sessionId": ""
4. Delete the refresh_tokens file in samples/companionService.
The next time you log in you will be prompted to authenticate.
________________________________________
Step 10: (Optional): Go headless and get rid of the monitor, keyboard, and
mouse
Now that you’ve got your AVS prototype running, you may want to get rid of
the
monitor, keyboard and mouse. You can do that by using SSH and VNC. Follow the
instructions to setup SSH and VNC.
2017.10.17 增加
強國文可參考這篇
https://zombiesyard.cn/2017/10/02/